Overview
manufacturer
McCormick
model
X4T
type
Crawler
Max Speed
15 km/h
Hydraulic System
42 + 28.5 l/min
Transmission
Speed Four
Engine Type
Deutz AG TCD 2.9 L4 HT / TCD 2.9 L4 HP
Quick Specs:
Engine Cyl / L: 4 / 2.9
Horsepower: 75 / 90 / 95 / 102 / 112
Transmission: Speed Four
Cab: Category Four
NEW McCORMICK CRAWLER TRACTOR
McCormick's new crawler tractor is Stage V compliant, equipped with a passively regenerating DPF particulate filter, DOC oxidation catalyzer and, for models with over 56 kW power output only, the SCR selective emission reduction catalyzer and 10.5 litre AdBlue tank.
Features
Category Four Cab
The platform is completely suspended from the wagon and engine compartment. This solution provides total insulation from heat and vibrations with a clear improvement in comfort. Front and side visibility and ergonomics are improved, thanks to the optimized driver's seat and completely redesigned side control console. The X4T is available with a category 4 cab, in accordance with the most stringent EU regulations in terms of operator safety, and with an enhanced ventilation system on board, capable of controlling internal pressurization, and active carbon filters. Cabin pressurization and filtration neutralize dust, pollutants and gases, also protecting the driver from the risks of treating vegetation in vineyards or orchards with plant protection products. The cab is innovative in terms of aesthetics, ergonomics, technology and is very comfortable. The X4 TF-TM offers a structural solution, i.e. a monocoque, making the tractor more compact also in terms of design, a theme on which Argo Tractors pays the utmost attention to pleasing comfort and aesthetics.
Engine
The X4.085 - X4.095 - X4.105 - X4.110 - X4.120 TF/TM models offer power ranging from a minimum of 75hp to a maximum of 112hp.
Transmission
The 16 + 8 speed transmission operates through a synchro reverse shuttle (a plus compared to the competition) and can be configured with overdrive, to increase the top speed up to 15 km/h, or alternatively with the Creeper, which allows a minimum speed of 300 metres per hour.
Hydraulics
The X4T has a dual pump hydraulic circuit, a 28.5 l/min pump for steering and a 42 l/min pump for the linkage and spool valves. To the basic equipment, three rear spool valves, two more can be added as options up to a total of five, with six front quick couplers and optional flow regulator. The rear power lift, further enhanced compared to the previous version and enriched with the optional ELS, has a maximum load capacity of 3,150 kg in the standard configuration and 4,500 kg when fitted with 2 additional hydraulic cylinders.




