The disc bearing station can be removed and mounted quickly and easily. Any needed repair is carried out at reduced costs from the outside with minimal downtime.

The Fast-Fit® quick-release knife system allows an operator to rapidly change out cutting knives with the use of a simple tool, yet still retain optimum cut quality and knife life. With Fast-Fit, an operator can achieve up to 50% time savings over a standard system.

Rotor speed can be adjusted from 615 to 888 RPM by switching the side pulleys. The slower speed is recommended when harvesting more delicate crops such as alfalfa.

The Lift-Control hydropneumatics suspension’s principal advantage is derived from the exclusive way in which the kinetic forces that act on the cutterbar are utilized. As the force exerted on the cutterbar increases, the suspension system automatically lightens the cutterbar. The greater the force, the lighter the cutterbar. This allows the machine to quickly adapt to changing terrain, minimizing ash content in the crop, protecting stubble, reducing wear on the machine and lowering fuel consumption.

No one can afford to damage their mower during the peak hay season because of forgotten or unnoticed obstacles. The mowing head will pivot up to 25° to the rear. At the same time, the mowing head will lift to clear the obstruction and then automatically reset to the original mowing position. There is no need to stop and reverse to reset the mower.

The pendulum-type articulation provides constant pressure over the whole mowing unit including on uneven ground. The articulation allows for 26" (66 cm) of travel (+14" (35 cm) /-12" (30.5 cm)) which makes mowing in uneven or hilly terrain possible. To accommodate different width front mowers, the operator has the ability to offset the mower 6" (15 cm). ​

FlexProtect side shields allow for close cutting on field edges and better deflection if encountering a foreign object.

In transport position, the mower folds at 126° to increase stability and reduce the overall height of the machine, ensuring operator comfort and safety.

The DigiDry® finger conditioner provides consistent drying of grass and legume crops in various conditions with little maintenance. Wide rotor, finger style conditioning increases crop-on-crop rubbing to strip off the waxy cuticle layer helping stems dry at the same rate as the leaves. The built-in break back feature normally protects against damage from rocks or other foreign objects.

Quickly and easily select from multiple conditioning hood positions to fine tune the intensity of crop conditioning. Additionally, these models have a conditioning comb that can be set in multiple positions.

• In grass, it is recommended to set the conditioning hood as close to the rotor as practical without causing plugging, and for the conditioning comb to be fully in the path of the crop stream for maximum conditioning effect.

• For legume crops, such as alfalfa, set the hood so there is slight scuffing of the stems, but little to no leaf detachment and take the comb completely out of the crop stream.

Depending on the crop and volume, periodic adjustments may be necessary to ensure desired conditioning.

Wide spreading is standard without needing to remove the swath deflectors. Operators can benefit from up to 80%+ swatch/cut width for maximum drying.