Excalibur^® CT blades are mounted on a shallow compound angle to ensure optimum soil penetration while limiting weight carried on the backside of the blade. This reduces compaction and smearing of soil, especially in wet conditions and helps ensure that residue is distributed throughout the soil profile and not simply buried at the bottom of the seedbed.

Center-mounted HD tines are fitted directly behind the first rank of Excalibur® CT blades and maintain full contact with the soil surface to initiate residue redistribution and soil leveling. This single row of heavy-duty tines is on 12" spacing to help capture all material flow from the front blades and force it downward, settling loose material before contacting the rear row of blades and finishing attachment, and reducing the quantity of material blowing over the rear of the machine. This ensures that as much residue as possible is sized, incorporated, and anchored rather than left on the field surface where it will be susceptible to blowing or washing off the field.

Star Wheel treader gangs, mounted on 6-degree angles, level the seedbed and size clods, while mixing and anchoring residue into the loose soil. Constant-flow hydraulic down pressure on the Star Wheel treader allows the attachment to maintain even working pressure across a varying field surface, resulting in a consistent, uniform finish. Many competitive units depend upon their rear attachment to control machine operating depth and thereby transmit significant weight to their rear attachment, which can result in a tight, compressed seedbed.

Available with flat blades for maximum clod sizing in hard soil conditions or round bars for increased soil firming in loamy soil conditions, this effective component contributes a superior finish in any field. The reel may also be raised hydraulically using the tractor SCV to increase field run time in wet conditions.

The large 25" diameter cage roller, with twelve 1-1/2" solid round rods, provides clod crushing and firming to achieve a quality fall seedbed or well-conditioned spring seedbed. The attachment utilizes adjustable constant pressure hydraulics from the tractor to achieve consistent soil conditioning. With this hydraulic pressure system and the natural weight of the cage roller, it applies approximately 180 pounds per foot to provide more uniform soil density.

Working depth is adjusted from a single point at the front of the machine and controlled using the walking beam mounted tires in the middle of the frame. With this configuration, front/rear levelling is not affected during depth changes and so changing machine depth is quick and easy and does not necessitate additional adjustments.

The Interceptor 8055 uses stabilizer wheels with a constant hydraulic down pressure system rather than a fixed position system which work in combination with the mechanically sprung leveling linkage. In effect, this provides the machine with a suspension system that dampens machine bounce and helps to ensure a level field finish. Because the stabilizer wheels are not set in a fixed position, they do not normally need to be adjusted when changing working depth, further reducing the number of potential adjustment points. When stabilizer wheel down pressure adjustment is necessary, it is set using a single valve block at the front of the machine.

Down pressure on wings and Star Wheel treaders is adjusted using valve blocks at the front of the machine. Varying wing pressure helps ensure even penetration across the width of the machine and will not normally require additional adjustment between seasons unless moving between extremely hard and soft conditions. Similarly, Star Wheel pressure is set to give the desired degree of residue anchoring and clod sizing and will not normally require additional adjustment unless moving between residue types.