Overview
Retain Residue, Remove Compaction
The 4835 in-line ripper provides efficient compaction removal, while allowing crop residue to remain virtually undisturbed on the surface. Working widths ranging from 10' to 27'6", and a variety of shank and point options are available to meet your agronomic needs.
The KUHN Krause 4835 in-line ripper is the ideal tool to fight soil compaction, one of the leading causes of yield reduction. With working depths of 8" to 16", the 4835 provides aggressive soil fracturing, while retaining valuable crop residue on the field surface. This allows for greater root development and water infiltration into the soil, and effectively reduces runoff and soil erosion. KUHN Krause 4835 in-line rippers are available in rigid 4- to 7-shank models or folding 7- to 11-shank models with choice of 30", 36", 38" or 40" shank spacing dependent upon model. The 4835 can be equipped with spring reset, Pathfind'r™ or rigid, shear-bolt protected shanks for soils where rock is not a concern. A variety of shanks and points are available depending on your agronomic needs.
Features
3-Point Hitch
Designed for deep tillage with strength and durability in mind. Category 3, 3N, 4 & 4N 3-point hitch configurations are available dependent on machine configuration. 3-point hitches are integrated into a two-bar frame design with main members of heavy-duty, 6"x6" structural steel tubing.
Rear Lift Drawbar Pull-Hitch
Rear lift pull-hitch option available for all 4835-530F through 4835-1130F models for transport stability. The drawbar pull-hitch includes 280/70 R15 tires on the rear lift and 280/70 R15 front mounted gauge wheel tires.
Shear-Bolt
Rigid, shear-bolt mounts are an economical choice for soils where rocks or other obstacles are not a concern. Shear-bolt protection guards against shank damage from unexpected obstacles.
Shear force: 10,000 pounds (approximate)
16" maximum shank working depth
For non-rock conditions
Spring Reset
Recommended for field conditions where obstacles or rocks may be encountered. A 4"x4" welded tube provides strength.
2,500 pound point load
20" trip height
16" maximum shank working depth
36" underframe clearance
PathFind'R™
Exclusive pivoting design allows the shank to deflect up to 6 degrees on each side for a total of 12 degrees of movement.
Basic spring reset design
Makes deep ripping possible on contours or terraces
Deflects impacts improving performance in rocky soils
Smoother steering under full power with tracked tractors
Reduces stress on implement frame and 3-point tractor hitch
Not compatible with pull-type hitch
20� trip height
16� maximum shank working depth
36� underframe clearance
A Variety of Options
The 4835 in-line ripper may be configured in many different ways to achieve your agronomic goals. Choose from a variety of shank, point and wing combinations to achieve your desired field finish. Surface field finish is primarily determined by the type of shank used with parabolic offering the most soil disturbance, followed by MRD and no-till. Compaction removal, residue incorporation and draft are determined by points and shank caps.
No-Till Shanks and Point"
Choice of ¾" no-till shank (normal conditions) or 1" no-till shank (extreme conditions)
Austempered wear bar
Choose from 1-3/4" or Double K chromium carbide points with either 8" wing or low disturbance shank cap
Pictured: ¾" no-till shank with Double K chromium carbide point and low disturbance shank cap (left), 1" no-till shank with 1-3/4" point and 8" wing (right)
Conservation Tillage Shanks & Points"
1-1/4" MRD (minimum residue disturbance) shank
Austempered wear bar
Choice of Double K 7" wing ripper point or Double K 2-1/2" straight ripper point
Pictured: 1-1/4" MRD shank with Double K 2-1/2" straight ripper point (left), 1-1/4" MRD shank with Double K 7" wing ripper point (right)
Conventional Tillage Shanks & Points"
Parabolic shank
Chrome wear bar or coverboard
Choice of Double K 2-1/2" straight ripper point or Double K 7" wing ripper point
Pictured: Parabolic shank with 2-1/2" straight ripper point and chrome wear bar (left), Parabolic shank with 7" wing point with cover board (right)
Equipment
Gauge Wheels
Ratchet-jack adjustable depth gauge wheels are standard equipment on the 4835. These 20.5" x 8" load range E tires, on 5-bolts hubs, maintain uniform depth in varying field surfaces and soil types.
Coulters
Heavy-duty, 22-inch diameter x 1/4" thick coulters are standard on each row of all 4835 in-line rippers. These rugged coulters feature 450 pounds of down pressure to slive through the toughest crop residues. Coulter hubcaps are secured with metal retainers to ensure bearing protection.
Closing Wheel Attachment
Designed to further limit soil blowout, optional closing wheels operate independently of shank depth maintaining constant soil contact close to the shank. Closing wheels are easily adjustable for operating position in relation to the ripper shank and down pressure.
Specifications
4835-430R | 4835-440R | 4835-530R | 4835-630R | 4835-636R | 4835-638R | 4835-640R | 4835-730F | 4835-730R | 4835-830F | 4835-836F | 4835-838F | 4835-840F | 4835-930F | 4835-1130F | |
Frame Type | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar | Heavy-Duty Toolbar 6"x 6" Double Rank Toolbar |
Number of Shanks | 4 | 4 | 5 | 6 | 6 | 6 | 6 | 7 | 7 | 8 | 8 | 8 | 8 | 9 | 11 |
Shank Spacing | 30" (76 cm) | 40" (101.6 cm) | 30" (76 cm) | 30" (76 cm) | 36" (91.4 cm) | 38" (96.5 cm) | 40" (101.6 cm) | 30" (76.2 cm) | 30" (76.2 cm) | 30" (76.2 cm) | 36" (91.4 cm) | 38" (96.5 cm) | 40" (101.6 cm) | 30" (76.2 cm) | 30" (76.2 cm) |
Working Width | 10' (3 m) | 13'4" (4.1 m) | 12'6" (3.8 m) | 15' (4.6 m) | 18' (5.5 m) | 19' (5.8 m) | 20' (6.1 m) | 17'6" (5.3m) | 17'6" (5.3m) | 20' (6.1 m) | 24' (7.3 m) | 25'4" (7.7 m) | 26'8" (8.1m) | 22'6" (6.8 m) | 27'6" (8.4 m) |
Hitch Type | Small Frame: CAT 3N, 3 and 4N | Small Frame: CAT 3N, 3 and 4N | Small Frame: CAT 3N, 3 and 4N | Small Frame: CAT 3N, 3 and 4N | Small Frame: CAT 3N, 3 and 4N | Small Frame: CAT 3N, 3 and 4N | Small Frame: CAT 3N, 3 and 4N | Small Frame: CAT 3N, 3 and 4N | Small Frame: CAT 3N, 3 and 4N | Small Frame: CAT 3N, 3 and 4N | Larger Frame: CAT 4N, and 4 | Larger Frame: CAT 4N, and 4 | Larger Frame: CAT 4N, and 4 | Larger Frame: CAT 4N, and 4 | Larger Frame: CAT 4N, and 4 |
Coulter Blades | 22" x ¼" Smooth, 450 lbs Down Pressure | 22" x ¼" Smooth, 450 lbs Down Pressure | 22" x ¼" Smooth, 450 lbs Down Pressure | 22" x ¼" Smooth, 450 lbs Down Pressure | 22" x ¼" Smooth, 450 lbs Down Pressure | 22" x ¼" Smooth, 450 lbs Down Pressure | 22" x ¼" Smooth, 450 lbs Down Pressure | 22" x ¼" Smooth, 450 lbs Down Pressure | 22" x ¼" Smooth, 450 lbs Down Pressure | 22" x ¼" Smooth, 450 lbs Down Pressure | 22" x ¼" Smooth, 450 lbs Down Pressure | 22" x ¼" Smooth, 450 lbs Down Pressure | 22" x ¼" Smooth, 450 lbs Down Pressure | 22" x ¼" Smooth, 450 lbs Down Pressure | 22" x ¼" Smooth, 450 lbs Down Pressure |
Working Depth Range | 8" - 16" (20.3 - 40.6 cm) | 8" - 16" (20.3 - 40.6 cm) | 8" - 16" (20.3 - 40.6 cm) | 8" - 16" (20.3 - 40.6 cm) | 8" - 16" (20.3 - 40.6 cm) | 8" - 16" (20.3 - 40.6 cm) | 8" - 16" (20.3 - 40.6 cm) | 8" - 16" (20.3 - 40.6 cm) | 8" - 16" (20.3 - 40.6 cm) | 8" - 16" (20.3 - 40.6 cm) | 8" - 16" (20.3 - 40.6 cm) | 8" - 16" (20.3 - 40.6 cm) | 8" - 16" (20.3 - 40.6 cm) | 8" - 16" (20.3 - 40.6 cm) | 8" - 16" (20.3 - 40.6 cm) |
Recommended Tractor Power | 35 - 50 ENG HP/shank | 35 - 50 ENG HP/shank | 35 - 50 ENG HP/shank | 35 - 50 ENG HP/shank | 35 - 50 ENG HP/shank | 35 - 50 ENG HP/shank | 35 - 50 ENG HP/shank | 35 - 50 ENG HP/shank | 35 - 50 ENG HP/shank | 35 - 50 ENG HP/shank | 35 - 50 ENG HP/shank | 35 - 50 ENG HP/shank | 35 - 50 ENG HP/shank | 35 - 50 ENG HP/shank | 35 - 50 ENG HP/shank |